A heat pump costs $8,350 on average to install, and most homeowners pay between $5,000 and $15,000, according to Fixr's 2026 cost guide. The price depends mostly on the type (ductless, ducted air-source, or geothermal), the size of the home, and the efficiency rating. Running cost depends on your electricity price, and the calculator below compares it with gas and electric resistance heat.
Heat pump cost by type
| Type | Installed cost | Best for |
|---|---|---|
| Ductless mini-split | $2,000–$8,000 | Homes without ducts, additions, single zones |
| Air-source (ducted) | $5,000–$15,000 | Replacing a central AC or furnace in a home with ducts |
| Geothermal (ground-source) | $15,000–$35,000 | Lowest running cost; needs ground loops drilled or trenched |
Source: Fixr, "How Much Does a Heat Pump Cost?" (updated January 22, 2026).
Heat pump cost by home size and tonnage
| Home size | Typical tonnage | Installed cost |
|---|---|---|
| 1,000 sq ft | 2 tons | $5,000–$8,000 |
| 1,500 sq ft | 2.5–3 tons | $6,700–$14,000 |
| 1,800–2,000 sq ft | 3–4 tons | $8,000–$20,000 |
| 2,500 sq ft | 3.5–5 tons | $9,500–$22,000 |
| 3,000 sq ft | 4–6 tons | $15,000–$25,000 |
Source: Fixr (2026). Tonnage by floor area is a rough guide; a Manual J load calculation sets the real size. One ton = 12,000 Btu/h.
Higher efficiency costs more up front: Fixr's 2026 guide lists systems around SEER2 14–15 at $5,000–$12,000 and SEER2 20 or higher at $15,000–$25,000. Cold-climate models that keep their heating output at low outdoor temperatures sit at the upper end but avoid relying on backup resistance heat.
Heat pump running cost calculator
Compare what the same amount of heat costs from a heat pump, an electric furnace or baseboard heat, and a gas furnace. COP (coefficient of performance) is how many units of heat a heat pump delivers per unit of electricity; it falls as outdoor temperatures drop.
Cost per million Btu of heat
1 kWh = 3,412 Btu; 1 therm = 100,000 Btu. Heat pump cost = heat ÷ 3,412 ÷ COP × electricity price.
What else affects the price
- Ductwork. Leaky or undersized ducts may need sealing or replacement; homes without ducts usually go ductless.
- Electrical capacity. A heat pump with backup heat strips can need a larger breaker, and older homes may need a panel upgrade.
- Number of zones. Each ductless indoor head adds cost.
- Dual-fuel setups. Keeping a gas furnace as backup for the coldest days changes both the equipment and the running-cost math.
- Permits. Fixr lists permits and inspection at $50 to $300.
Heat pump replacement: repair or replace?
Replacement usually makes sense when the system is old, needs a major part such as the compressor, or uses R-22 refrigerant. The EPA banned new production and import of R-22 from January 1, 2020, so recharging an older system now relies on recycled supplies and can be expensive. Other signs it's time: frequent repairs, rooms that won't reach temperature, and backup heat strips running much more than they used to, which shows up as a jump in the winter electric bill. When replacing, have the contractor check the duct system and run a load calculation instead of matching the old unit's size; many older systems were oversized. The cost of a heat pump replacement is the same as a new installation in the tables above, minus any ductwork that can be reused.
Tax credits and rebates in 2026
The federal energy efficient home improvement credit (section 25C), which covered 30% of a qualifying heat pump up to $2,000 a year, ended for property placed in service after December 31, 2025, under the 2025 budget law (P.L. 119-21), according to the IRS. Many cost guides written earlier still mention it. State energy offices and utilities may offer their own rebates; the DSIRE database lists programs by state.
Common questions
How much does a heat pump cost?
$8,350 on average installed; $5,000–$15,000 for most homes (Fixr, 2026).
How much does a 3-ton heat pump cost?
$6,700–$14,000 for about 1,500 sq ft (2.5–3 tons); $8,000–$20,000 for 1,800–2,000 sq ft (3–4 tons), per Fixr.
Is there still a tax credit for heat pumps?
No federal 25C credit for systems placed in service after December 31, 2025. State and utility rebates may apply.
Is a heat pump cheaper to run than gas?
It depends on your electricity and gas prices and the climate. At 18.16¢/kWh and COP 3, heat costs about $17.74 per million Btu; gas at $1.50 a therm in a 95% furnace costs about $15.79.
How many watts does a heat pump use?
Divide its heating or cooling output in Btu/h by 3,412 × COP. A 36,000 Btu/h unit at COP 3 draws about 3.5 kW; more when backup heat strips run.
Sources
- Fixr, "How Much Does a Heat Pump Cost? [2026 Data]" (updated January 22, 2026).
- Internal Revenue Service energy credit FAQs (FS-2025-05) and P.L. 119-21: termination of section 25C after 2025.
- U.S. Energy Information Administration, Electric Power Monthly, Table 5.6.A, August 2026 (electricity price); EIA Btu conversion factors.