Watts to Amps Calculator

To convert watts to amps, divide watts by volts: amps = watts ÷ volts. A 1,500-watt heater on a 120-volt outlet draws 12.5 amps. To go from amps to watts, multiply: watts = amps × volts. The calculator below works both ways, for DC, single-phase AC, and three-phase AC.

Convert watts and amps

W
V
120 or 240 in U.S. homes; 12, 24, or 48 for DC
PF
1 for heaters and lights; about 0.8–0.95 for motors
Amps
–
At 120 V
–
At 240 V
–

Watts, amps, and volts in plain terms

Think of electricity in a wire like water in a hose. Volts are the pressure pushing it, amps are how much is flowing, and watts are the work it can do, which depends on both. Raise the pressure and you can deliver the same work with less flow. That's why a 240-volt dryer draws half the current a 120-volt version of the same power would need, and why the same light bulb draws far more current from a 12-volt battery than from a wall outlet. Your breaker and wiring care about current; your bill cares about watts over time.

Watts to amps formulas

  • DC: amps = watts ÷ volts. A 600-watt load on a 12-volt battery draws 600 ÷ 12 = 50 amps.
  • AC single-phase: amps = watts ÷ (volts × power factor). For resistive loads such as heaters, toasters, and incandescent lights, the power factor is 1, so it's simply watts ÷ volts.
  • AC three-phase (line-to-line voltage): amps = watts ÷ (√3 × volts × power factor), where √3 ≈ 1.732. A 10,000-watt load at 208 volts with a power factor of 1 draws 10,000 ÷ (1.732 × 208) = 27.8 amps.

Power factor describes how much of the current in an AC circuit does useful work. Motors, compressors, and some electronic power supplies have a power factor below 1, which means they draw more amps than watts ÷ volts suggests. If you don't know it, 1 gives the minimum current; for motors, 0.8 is a cautious estimate. For kilowatts, see kW to amps.

Watts to amps chart

Power factor 1. 12 V is DC; 120 V and 240 V are standard U.S. household circuits.

WattsAmps at 12 VAmps at 120 VAmps at 240 V
100 W8.30.830.42
200 W16.71.670.83
300 W252.51.25
400 W33.33.331.67
500 W41.74.172.08
600 W5052.5
750 W62.56.253.13
800 W66.76.673.33
1,000 W83.38.334.17
1,200 W100105
1,500 W12512.56.25
1,800 W150157.5
2,000 W166.716.678.33
2,400 W2002010
2,500 W208.320.8310.42
3,000 W2502512.5
3,500 W291.729.1714.58
4,000 W333.333.3316.67
5,000 W416.741.6720.83

Amps to watts chart

To convert amps to watts, multiply by the voltage (power factor 1):

AmpsWatts at 12 VWatts at 120 VWatts at 240 V
1 A12120240
2 A24240480
3 A36360720
5 A606001,200
10 A1201,2002,400
13 A1561,5603,120
15 A1801,8003,600
20 A2402,4004,800
30 A3603,6007,200
40 A4804,8009,600
50 A6006,00012,000

How many watts can a circuit handle?

The breaker's amp rating × the voltage gives the circuit's maximum watts. For loads that run for three hours or more, such as a space heater, electrical practice limits the load to 80% of the breaker rating:

CircuitMaximumContinuous (80%)
15 A, 120 V (most outlets)1,800 W1,440 W
20 A, 120 V (kitchens, laundry)2,400 W1,920 W
30 A, 240 V (dryers, water heaters)7,200 W5,760 W
50 A, 240 V (ranges, EV chargers)12,000 W9,600 W

That's why a 1,500-watt space heater (12.5 amps) is about all a 15-amp circuit should carry for hours, and why plugging a hair dryer into the same circuit trips the breaker. For appliance wattages, see the appliance wattage chart.

Watts to amps at 12 volts

Low-voltage DC systems in cars, RVs, boats, and solar setups draw ten times the current of a 120-volt circuit for the same watts. A 300-watt inverter load on a 12-volt battery pulls 25 amps from the battery, plus 10% to 15% more for inverter losses. That's why 12-volt wiring is thick and why larger solar and battery systems move to 24 or 48 volts: doubling the voltage halves the current. For more on voltage, see volts to watts.

Common questions

How do you convert watts to amps?

Amps = watts ÷ volts. 1,200 W at 120 V is 10 A. For AC motors, divide by volts × power factor.

How many amps is 1,500 watts?

12.5 A at 120 V; 6.25 A at 240 V.

How many amps is 3,000 watts?

25 A at 120 V; 12.5 A at 240 V; 250 A at 12 V DC.

How do you convert amps to watts?

Watts = amps × volts. 10 A at 120 V is 1,200 W; 5 A is 600 W.

How many watts can a 15-amp circuit handle?

1,800 W maximum at 120 V; 1,440 W for continuous loads.

Notes

  • Formulas follow Ohm's law and the standard power relations for DC, single-phase, and balanced three-phase AC circuits.
  • The 80% continuous-load limit reflects the National Electrical Code's rules for continuous loads; local code and a licensed electrician have the final say on wiring.
MS

Mohamed Skhiri builds the calculators on kWhPlan.