The right water heater size depends on how much hot water your household uses in its busiest hour, not on the number of bathrooms. For a tank, match that peak hour demand to the heater's first hour rating. For a tankless unit, add up the flow rates you'll run at once and the temperature rise you need. Both calculators below follow the Department of Energy's sizing method.
Tank water heater size calculator
Think of your busiest hour, usually morning, and count each use. Gallons per use come from DOE's peak hour demand worksheet.
Peak hour demand
Worksheet values: U.S. Department of Energy, Energy Saver, "Sizing a New Water Heater" (standard usage, no water conservation). DOE's own example (3 showers, 1 shave, 1 hand dishwashing) totals 36 gallons and calls for a first hour rating of 34 to 38. Tank size suggestion is a rough guide; the first hour rating on the EnergyGuide label is what to match.
Tank size vs. first hour rating
Two 50-gallon tanks can deliver different amounts of hot water in an hour. A gas burner reheats water faster than a standard electric element, so a gas tank usually has a higher first hour rating than an electric tank of the same size. The EnergyGuide label lists it in the top left as "Capacity (first hour rating)". DOE suggests choosing a model whose first hour rating is within 1 or 2 gallons of your peak hour demand.
Heat pump water heaters move heat from the surrounding air rather than making it, and recover more slowly in heat-pump-only mode; many switch on a backup element when demand is high. Their tanks are often a size larger than the conventional tank they replace.
Water heater sizes by household
| Tank size | Household size |
|---|---|
| 30 gallons | 1–2 people |
| 40 gallons | 1–4 people |
| 50 gallons | 3–5 people |
| 75 gallons | 4–6 people |
| 80 gallons | 6 or more people |
Household guide: Fixr water heater cost guide (2026). Use it as a starting point, then check against your peak hour demand.
Tankless water heater size calculator
Tankless (on-demand) heaters are rated by how many gallons per minute (gpm) they can heat by a given number of degrees. Add up what you'll run at the same time.
Flow and temperature rise
Flow rates and temperatures: DOE's tankless sizing example (2.5 gpm shower + 0.75 gpm faucet; 50°F in, 120°F out = 70°F rise). Power = gpm × rise × 8.34 lb/gal × 60 ÷ 3,412 Btu/kWh.
The power numbers explain why whole-house electric tankless heaters are rare in cold climates: heating 3.25 gpm by 70°F takes about 33 kW, more than many homes' electrical service can spare. DOE notes that gas-fired tankless heaters typically manage a 70°F rise at about 5 gpm and electric ones at about 2 gpm. Gas units are rated in Btu/h of input; multiply the kW above by 3,412 and divide by the unit's efficiency.
Sizing tips
- Spread out hot water use: running the dishwasher and laundry outside the morning shower rush lets a smaller tank keep up.
- Low-flow showerheads reduce both peak demand and the flow a tankless unit has to handle.
- Don't oversize: a bigger tank loses more heat sitting idle, and every gallon kept hot costs money around the clock.
- Set the thermostat to 120°F, which DOE recommends for most homes.
Prices for each type and size are on water heater cost. Electric water heating is one of the biggest loads in a home: about 2,706 kWh a year where it's used (EIA), which you can price with the electricity cost calculator.
Common questions
What size water heater do I need for a family of 4?
Usually 40–50 gallons, but match the first hour rating to your peak hour demand; DOE's 3-shower example needs about 36 gallons in an hour.
What is a first hour rating?
Gallons of hot water a tank can deliver in one hour from full; it's on the EnergyGuide label.
What size tankless water heater do I need?
Enough gpm for fixtures used at once (shower 2.5 + faucet 0.75 = 3.25 gpm) at your temperature rise (70°F with 50°F incoming water).
Is a 40-gallon water heater enough?
For many households of 1–4 people (Fixr), if the first hour rating covers the busiest hour.
Sources
- U.S. Department of Energy, Energy Saver, "Sizing a New Water Heater" (archived page): peak hour worksheet, first hour rating guidance, tankless flow and temperature rise.
- Fixr, water heater installation cost guide (updated January 27, 2026): household sizes by tank.
- U.S. Energy Information Administration, RECS 2020, Table CE5.3a (water heating 2,706 kWh per household using).