Whole House Generator Cost

Angi's 2026 cost data puts the national average for generator installation at $5,154, based on 4,364 verified projects, with most homeowners paying between $1,509 and $8,799. A whole house generator, meaning a permanent standby unit with an automatic transfer switch, usually lands in the upper part of that range or above it, because the price adds up from several parts: the generator, the transfer switch, a gas line, a pad, wiring, and permits. The estimator below adds them up so you can compare quotes.

$5,154
Average generator installation (Angi, 2026)
$1,509–$8,799
What most homeowners pay
$2,700–$3,700
Transfer switch installed (Fixr)
$200–$500
Yearly maintenance (Fixr)

Generator cost estimator

Replace the example unit price with the price from your quote, and adjust each installation item. Defaults for installation items are the midpoints of Fixr's cost ranges (guide last updated in 2022, so local prices may be higher today).

Installed cost

$
Example only; use your quote
$
Fixr: $2,700–$3,700
$
Fixr: $500–$1,000
$
Fixr: $1,000–$1,500
$
Fixr: $1,000–$2,000
$
Varies by town
kW
$
Fixr: $200–$500
Installed total
–
Per kW
–
10-year cost of ownership
–

What's in the price

  • The generator. Home standby generators are sold in sizes from about 10 kW to 26 kW for houses, and larger for big homes. The unit is usually the largest single line on the quote; bundles that include a transfer switch are common.
  • Transfer switch. An automatic transfer switch disconnects your home from the grid and starts the generator when the power fails. Fixr's guide puts it at roughly $2,700 to $3,700 installed, including the switch (about $900), wiring, and labor. A "whole-house" switch covers every circuit; a smaller "essential circuits" switch costs less but powers only selected circuits.
  • Fuel connection. Natural gas units tie into your gas service, sometimes requiring a larger gas meter from the utility; propane units need a tank sized for multi-day outages. Long runs from the meter or tank cost more.
  • Pad and placement. The unit sits on a pad near the house, with clearances set by the manufacturer and local code from windows, doors, and vents.
  • Electrical work and permits. Wiring between the generator, transfer switch, and panel, plus electrical and gas permits and inspections. An old or full electrical panel can add a panel upgrade.

What makes a generator cost more

  • Size. Covering central AC, an electric range, and electric heat takes a bigger unit than covering essentials. A load-management module that switches big appliances off when the generator is near capacity lets a smaller generator cover a whole house. Size it with the generator size calculator.
  • Distance. Every extra foot between the generator, the gas meter, and the electrical panel adds pipe, wire, and labor.
  • Panel and service upgrades. Older homes may need a new panel or meter base.
  • Region and season. Labor rates vary, and prices and wait times rise after big storms.

Cheaper and quieter alternatives

Portable generator with a transfer switch or interlock

A 5,000 to 7,500-watt portable generator connected through a manual transfer switch or panel interlock powers essential circuits for a fraction of the cost of a standby system. The trade-off: you have to set it up, refuel it, and run it outdoors at least 20 feet from the house. See what a generator can run.

Home battery backup

A battery such as a Tesla Powerwall 3 (13.5 kWh) runs silently and switches over instantly, and with solar panels it can recharge during a long outage. EnergySage's 2026 marketplace data puts a typical Powerwall 3 at $13,473 installed before incentives. One battery covers essentials for a day or so, not a whole house with central air for days. Compare on home battery backup cost.

Running costs

Standby generators run a short self-test every week or so, and need yearly service: oil, filters, spark plugs, and a battery check. Fixr puts maintenance at $200 to $500 a year. During an outage, fuel use rises with the load; the manufacturer's spec sheet lists gas or propane consumption at half and full load, which you can multiply by your fuel price to estimate cost per day.

Tax credits and incentives

There's no federal tax credit for gas or propane home standby generators. The federal residential clean energy credit, which covered solar panels and home batteries, ended for expenditures made after December 31, 2025, under the 2025 budget law (P.L. 119-21), according to the IRS. Some states and utilities run their own resilience or battery programs, so check local offers.

Common questions

How much does a whole house generator cost?

Angi's 2026 national average for generator installation is $5,154; most pay $1,509–$8,799. Large standby systems with long gas runs cost more.

How much does it cost to install a transfer switch?

About $2,700–$3,700 including switch, wiring, and labor, per Fixr (2022 guide).

Is there a tax credit for a home generator?

No federal credit for fossil-fuel generators. Local resilience programs may help, mostly for batteries.

How long does installation take?

The on-site work often takes a day or two; permits, gas meter upgrades, and inspections usually take longer than the installation itself.

Sources

  • Angi, "Whole House Generator Cost [2026 Data]" (national average $5,154 from 4,364 verified projects).
  • Fixr, "Cost to Install a Whole House Generator" (updated August 19, 2022): transfer switch, labor items, and maintenance ranges.
  • EnergySage, Tesla Powerwall 3 review (updated May 15, 2026).
  • Internal Revenue Service energy credit FAQs; P.L. 119-21 (termination of the residential clean energy credit after 2025).
MS

Mohamed Skhiri builds the calculators on kWhPlan and checks cost figures against named, dated sources.